Please note, most links within this site now redirect to Process Sensing Technologies for the most up to date information.

OEM Equipment:
KISS Sport
Teledyne K-1D

Advanced galvanic type % oxygen sensor with excellent stability and accuracy under stringent applications. All % oxygen sensor are subjected to the most extensive stability test, output in air, 30" of water column pressure test and stability at 100% oxygen. The widest range of oxygen sensors offered by Analytical Industries, Inc. are "Made in USA"


Measuring Range 0-100%
Accuracy 1 +/-2% of Full Scale
Signal Output 2 7 - 13 mV
Linearity +/-2% of Full Scale
Response T90 13 sec
Temp Coefficient Compensated
Operating Temp 0 to 45°C
Recommended Storage 3 0 to 25°C
Qualified at 1.8 ATA
Shelf Life 4 6 months
Humidity Non-condensing 0-99% RH
Expected Life 24 months
Warranty 5 12 months
Electrical Connector 2 male pins


  * Conditions - Specification validated during design and in pursuit of improvement are subject to change without notice
  1. At constant temperature and pressure.
  2. In air (20.9% oxygen) at 25°C and 1 atm.
  3. Sensor may be stored up to 55°C on an intermittent basis, for example, during transportation.
  4. In original Package at 25°C and 1 atm.
  5. Under normal operating conditions, the sensor is warranted to be free of defects in material and workmanship for the specified period provided the sensor is properly installed and operated. The sole remedy for sensor determined to be defective by Analytical Industries Inc. is limited to replacing the sensor. Analytical Industries Inc. will not be liable for buyer’s negligence, misapplication, abuse or accident.


PSR-11-75D

* These fields are required.

 
 
PLACE ORDER NOW!

CALL 909-392-6900
Analytical Industries Inc.
2855 Metropolitan Place,
Pomona, CA, 91767
USA
909-392-6900
What we do
Analytical Industries Inc manufactures high-quality electrochemical oxygen sensors and gas analyzers for industrial process control as well as breathing air for diving and medical treatment.