Advanced PSR-11-75-KE replaces Figaro KE-25 percent oxygen sensor
PSR-11-75-KE Percent Oxygen Sensor
Recommended for use in measuring oxygen in gas mixtures containing CO2
OEM Equipment:
Various OEM Analyzers
Figaro KE-25 (Japan Storage)
OEM Equipment:
Various OEM Analyzers
Figaro KE-25 (Japan Storage)
Advanced PSR-11-75-KE replaces Figaro KE-25 percent oxygen sensor. This galvanic type oxygen sensor offers excellent stability and accuracy in gas streams containing CO2. All sensors are subjected to the most extensive stability test, output in air, 30" of water column pressure test and stability at 100% oxygen. The widest range of oxygen sensors offered by Analytical Industries, Inc. are "Made in USA"
| Measuring Range | 0-100% |
| Accuracy 1 | +/-2% of Full Scale |
| Signal Output 2 | 10 - 14 mV |
| Linearity | +/-2% of Full Scale |
| Response T90 | 13 sec |
| Temp Coefficient | Compensated |
| Operating Temp | 0 to 45°C |
| Recommended Storage 3 | 0 to 25°C |
| Shelf Life 4 | 6 months |
| Humidity Non-condensing | 0-99% RH |
| Expected Life | 60 months |
| Warranty 5 | 18 months |
| Electrical Connector | 12" Wires |
* Conditions - Specification validated during design and in pursuit of improvement are subject to change without notice
- At constant temperature and pressure.
- In air (20.9% oxygen) at 25°C and 1 atm.
- Sensor may be stored up to 55°C on an intermittent basis, for example, during transportation.
- In original Package at 25°C and 1 atm.
- Under normal operating conditions, the sensor is warranted to be free of defects in material and workmanship for the specified period provided the sensor is properly installed and operated. The sole remedy for sensor determined to be defective by Analytical Industries Inc. is limited to replacing the sensor. Analytical Industries Inc. will not be liable for buyer’s negligence, misapplication, abuse or accident.
